|
Spray Undercoating ABRO U-60 Spray Undercoat (New Formula!) is a rubberized undercoat to protect against rust, corrosion and moisture, and reduces road noise and vibrations. This rubberized, asphaltic formula composition resists chipping, abrasion, and exterior corrosion, so as to provide maximum protection and durability. Use ABRO U-60 Spray Undercoat on:
- Wheel and Fender Wells
- Undercarriages
- Door and Quarter Panels
- Welded Joints
- Other Unpainted Surfaces
APPLICATION
Surface to be undercoated must be clean, dry and free of any wax, rust or loose paint. Mask surrounding area from overspray. Shake well (at least 2 minutes after mixing ball is heard). Hold can upright 12"-18" from surface and apply uniform even strokes. After each 20-25 seconds of use, shake briefly again. Accidental overspray should be wiped off immediately. Warning: Because of extremely high operating temperatures, undercoating must not be applied within 12" of entire engine and exhaust system.
PACKAGING / STORAGE
- 16.25-ounce can (461 g) / 12 cans per case
- Store and use in cool, dry well ventilated areas. Do not store above 120oF (49oC)
Technical Data
|
Appearance and Odor
|
Aerosol Product
|
|
Specific Gravity (H2O=1)
|
0.91
|
|
Solubility in Water
|
Nil
|
|
Flash Point
|
156 deg F
|
|
Flammable Limits in Air by volume
|
Lower 0.9 Upper 30
|
|
