|
10-Minute Radiator Flush
ABRO AB-505 Radiator Flush is safe for all automotive cooling systems. Our concentrated formula
- Quickly Removes Rust, Sludge, Scum and Scale
- Helps prevent overheating
- Harmless to system metal and rubber parts
- Safe for All Cooling Systems
- Fast and Effective
APPLICATION
- Remove radiator cap (never remove a radiator cap while engine is hot) and pour entire contents into a full cool radiator. Replace the cap.
- After engine has reached normal operating temperature, idle for 10-20 minutes with heater on. Do not Drive
- Stop engine and allow to cool.
- Remove radiator cap and open draincocks. For best results, run water from a hose into the radiator just fast enough to overflow slightly. DO NOT ADD COLD WATER TO A HOT, EMPTY SYSTEM.
- With engine idling, flush until liquid runs clear. Shut off engine and allow the system to drain completely. Close draincocks.
- Refill radiator with recommended concentration of Antifreeze/Coolant and water mixture. Replace radiator cap to fully closed position.
PACKAGING / STORAGE
- 12 oz (354 mL) Plastic Bottle / 24 Bottles per Case
- Store in cool ventilated areas
TECHNICAL DATA
|
Appearance
|
Clear Liquid w/Slight Sweet Odor
|
|
Hazardous Classification
|
Non-Hazardous
|
|
Specific Gravity
|
8.9 ibs/gallon
|
|
Solubility in Water
|
Complete
|
|
Boiling Point
|
215oF
|
|
% Volatiles by Volume
|
87%
|
|
Flash Point
|
None to Boiling
|
|
PH
|
8.5-9.9
|
|
